Remote Asset Monitoring
Our range of Remote Asset Monitoring units allow any process parameter to be monitored remotely using standard Web Browsers. The units feature wired or wireless inputs and then send this data to secure Web Servers using the GPRS or 3G networks. Inputs to the units include any of our ZigBee wireless sensors or Isoslice I/O modules and devices with RS232 or RS485 communications ports. The monitored points can be displayed in real time together with logged data on password protected web pages. We also have units which can send SMS or Email alarms.
90 results found:
FREQCON-IPWM Analogue to PWM Frequency Converter
£0.00
The FREQCON-IPWM converter accepts any type of process input and provides a PWM output.
This is typically used with units such as PLC's which don't have an analogue input but do have a PWM input.
Using the FREQCON-IPWM mA, thermocouple, RTD, or voltage signal can be converted to a PWM output which can then be fed into a PLC or similar device.
Please contact sales for pricing & quantity discounts
FREQCON-PWMI PWM Frequency to Analogue Converter
£0.00
The FREQCON-PWMI converter can convert virtually any PWM type input into an isolated 4-20mA or Voltage output. Any frequency between 0 and 250kHZ can be converted and almost any input voltage level can be read.
Please contact sales for pricing & quantity discounts
VOLTCON High Voltage Isolating Converter
£0.00
This range of isolated signal converters can accept a wide range of AC and DC voltages and provide an isolated
4-20mA output. Voltages up to 500V AC or DC can be converted.
The device uses a true RMS input stage which allows accurate measurement of non-perfect AC waveforms.
Please contact sales for pricing & quantity discounts
420TWRTD Loop Powered isolator
£0.00
The 420TWRTD can replace standard DIN rail terminals to provide input isolation, signal conversion and RFI and noise rejection.
The isolators are 2-wire devices needing a 24Vdc supply on one terminal and returning a 4-20mA output on the other.The input for the RTD version can be configured for most 2 or 3 wire PT100 sensors please see the data sheet for all the options available.
Please contact sales for pricing & quantity discounts
420-DIG Digital Input & Output Isolator
£0.00
The 420-DIG digital isolator is typically used to provide field to input isolation for all types of digital input or output.
The 420-DIG units allow PLC and other I/O cards to connect to high voltage digital inputs and to switch higher output loads.
Please contact sales for pricing & quantity discounts
£0.00
The 420TWTC can replace standard DIN rail terminals to provide input isolation, signal conversion and RFI and noise rejection.
The isolators are 2-wire devices needing a 24Vdc supply on one terminal and returning a 4-20mA output on the other.The input for the TC version can be configured for most standard thermocouples types and mV inputs, see the data sheet for all the options available.
Please contact sales for pricing & quantity discounts