Search Results
88 results found:
You searched for:
IWR-5 Five channel Wireless Receiver
£256.85
The IWR-5 is a five channel receiver designed to pair with the IWPT
& IWTT wireless pressure & temperature transducers to form a cost
effective replacement of the traditional wired transducers. This offers a
low cost solution to inaccessible or expensive installation environments.
The receiver has user selectable voltage or mA outputs corresponding to
the calibrated range of the remote Wireless Transducers and 5A rated
changeover contacts for alarm functionality.
User channel configuration is possible with the use of the program,
IWR-Set, which ensures minimal user set-up time and thus ensures a
simple solution to multi-channel pressure & temperature measurement
applications. With the standard 0dBI antenna, a line-of-sight range of
up to 500 m can be achieved and, using the optional 3dBI antenna, up to
750m (LOS) is achievable.
4002ALMHL-FC Dual Trip Amplifier
£265.00
The 4002LMHL is an analogue Trip Amplifier designed to take mA or Voltage inputs and provide two alarm relay outputs and an optional isolated re-transmission of he input signal.
It has an optional LED display which can be used to display the input and setpoints as a 0-100% value.
A 115/230 Vac version is available as well as a 24Vdc powered unit.
£74.00
The DPP100-24 is a 100W Power supply with a universal input and 24Vdc output.
The unit is housed in a compact DIN rail enclosure. The input voltage range is 90 to 264 Vac and other power options are available.
ISOSLICE-5 Eight Digital input module
£209.34
The ISOSLICE-5 is an isolated input module which has four thermocouple input channels.
The unit has input to power supply isolation and channel to channel isolation and connects to the E-100,Z-200 or Z-PORT modules allowing a complete I/O system to be achieved.
IWCTT Current Transformer input wireless transmitter
£152.99
The IWCTT Wireless Transmitter is a cost effective alternative to traditional wiring that offers the advantages of a low-cost installation in inaccessible and expensive installation environments. Operates with any Split Core current transformer which gives a mV AC output, typically 333mV.
It is easily paired to any of the range of IWR receivers - thus offering a “plug and play” solution to your current measuring application. The IWCTT sensor should be used with any of the IWR range of receivers. A line-of-sight range of up to 500 m is possible depending on the wireless receiver used (refer to specific receiver datasheets for
further information).
£218.70
The Novaris LCP provides protection for both 4-wire and 6-wire loadcells as well as the measuring instrument. The LCP is contained within an IP65 enclosure, or alternatively as a PCB only. Installation of the LCP is certified and does not affect weighbridge calibration.
MATHSCON-6 Programmable Maths Unit
£247.46
The MATHSCON-6 performs a maths function on two inputs and provides an isolated 4-20mA or voltage output of the result.
One of the inputs is universal the other is mA or voltage only.
Maths Functions include Average, Add, Subtract, Division, Multiply and Square Root.
House in a 12.5mm DIN rail housing
4002ALMRTD-FC Dual Trip Amplifier
£295.00
The 4002ALMRTD is an analogue Trip Amplifier designed to take RTD inputs and provide two alarm relay outputs and an optional isolated re-transmission of he input signal.
It has an optional LED display which can be used to display the input and setpoints as a 0-100% value.
A 115/230 Vac version is available as well as a 24Vdc powered unit.
£93.00
The DPP240-24 is a 240W Power supply with a universal input and 24Vdc output.
The unit is housed in a compact DIN rail enclosure. The input voltage range is 90 to 264 Vac and other power options are available.
ISOSLICE-6 Four Digital output module
£240.34
The ISOSLICE-6 is an isolated output module which has four relay output channels.
The unit has input to power supply isolation and channel to channel isolation and connects to the E-100,Z-200 or Z-PORT modules allowing a complete I/O system to be achieved.
IWLoadT Strain Gauge and Load Cell input wireless transmitter
£152.99
The IWLoadT accepts an input from a Strain Gauge or Load Cell and transmits the value wirelessly to a suitable receiver such as the IWR-PORT.
The IWLoadT is mounted in an acetal plastic IP67 enclosure and is powered by a 3.6V lithium battery. Typical battery life at a 10s update rate would be more than 3 years. Channel number and update rate can be selected using internal DIP switches and you can choose between either an on board ceramic chip antenna or SMA connector for an external antenna.
Typical transmission ranges are 500m outdoor, 50m indoor.
4002ALMTC-FC Dual Trip Amplifier
£295.00
The 4002LMTC is an analogue Trip Amplifier designed to take thermocouple or voltage inputs and provide two alarm relay outputs and an optional isolated re-transmission of he input signal.
It has an optional LED display which can be used to display the input and setpoints as a 0-100% value.
A 115/230 Vac version is available as well as a 24Vdc powered unit.
420i 4-20mA Loop Powered Isolator
£117.04
The 420i 4-20mA loop powered isolator is used to provide an isolated 4-20mA current loop from any existing 4-20mA loop. The isolator gets its power from the input loop and so needs no auxiliary power supply.
£153.00
The DPP480-24 is a 480W Power supply with a universal input and 24Vdc output.
The unit is housed in a compact DIN rail enclosure. The input voltage range is 90 to 264 Vac and other power options are available.
ISOSLICE-7 two Pulse input module
£209.34
The ISOSLICE-7 is an isolated input module which has two pulse input channels.
The unit has input to power supply isolation and channel to channel isolation and connects to the E-100,Z-200 or Z-PORT modules allowing a complete I/O system to be achieved.
IWPotT Potentiometer input wireless transmitter
£152.99
The IWPotT accepts an input from a 2 or 3 wire Potentiometer and transmits the value wirelessly to a suitable receiver such as the IWR-PORT.
The IWPotT is housed in an acetal IP67 enclosure and is powered by a 3.6V lithium battery. Typical battery life at a 10s update rate would be more than 5 years. Channel number and update rate can be selected using internal DIP switches and you can choose between either an on board ceramic chip antenna or SMA connector for an external antenna.
Typical transmission ranges are 500m outdoor, 50m indoor.
ISOSLICE-8 Four analogue output module
£255.84
The ISOSLICE-8 is an isolated output module which has four mA or voltage output channels.
The unit has input to power supply isolation and channel to channel isolation and connects to the E-100,Z-200 or Z-PORT modules allowing a complete I/O system to be achieved.
IWTaT Wireless Ambient Temperature Transmitter
£145.00
The IWTaT ambient temperature transmitter has been designed to
operate with the range of wireless receivers manufactured by Cynergy3.
Either ambient temperature alone or both temperature and humidity
measurements can be specified. Typically the unit transmits the
measured values back to a IWR-PORT which can be connected to an
Ethernet or RS-232/485 communications network. For temperature and
humidity see the IWTRhT.
The unit is specially designed to maximise battery life and in a typical
application the battery life can exceed five years.
ISOSLICE-9 4 Channel AC Current & Voltage input module
£285.30
The ISOSLICE-9 is an isolated input module which has four AC current or voltage input channels.
The unit has input to power supply isolation but not channel to channel isolation and connects to the E-100,Z-200 or Z-PORT modules allowing a complete I/O system to be achieved.
IWTRhT Temperature & RH Wireless Transmitter
£175.50
The IWTRhT ambient temperature and relative humidity transmitter has
been designed to operate with the range of wireless receivers designed
and manufactured by Sensata.
Either ambient temperature alone or both temperature and humidity
measurements can be specified. (see IWTaT)
Typically the unit transmits the measured values back to a IWR-PORT
which can be connected to an Ethernet or RS-232/485 communications
network.
The unit is specially designed to maximize battery life and in a typical
application the battery life can exceed three years.
£184.51
The Isocon-3 is probably the only AC Powered single channel isolating converter you'll ever need !
The Isocon-3 signal isolator can accept virtually any input including 4-20 mA loops, voltage inputs, thermocouples, PT100 sensors and potentiometers and provide an isolated 4-20mA or Voltage output..
The Isocon-6 is also available if a DC power supply is required.