The Process Instrumentation People
  • Industrial Interface Facebook
  • Industrial Interface Twitter
  • Industrial Interface LinkedIn
  • Industrial Interface YouTube

Wireless Sensors & Systems

We manufacture a wide range of wireless sensors and network co-ordinators. These allow any process variable to be transmitted wirelessly to a receiver unit where the value can be either output as a mA or voltage signal or stored as a Modbus register for transmission to an Ethernet, RS232 or RS485 communications network.

Transmitters include units for mA, voltage RTD and thermocouple inputs and the Z-Head-4 range allow up to 4 inputs into a single transmitter.

Wireless routers allow the wireless transmitters to be sited in hard to reach areas and extend the range of the wireless network.

Search Form

Wireless Transmitters

Wireless Transmitters

Z-HEAD mA input wireless transmitter

The Z-HEAD-HL-MA accpets a mA input and transmits the value wirelessly to a suitable receiver such as the Z-PORT.
The Z-HEAD can be mounted in either a metal or plastic IP65 enclosure and is powered by a 3.6V lithium battery. Typical battery life at a 10s update rate would be more than 3 years. Channel number and update rate can be selected using internal DIP switches and you can choose between either an on board ceramic chip antenna or SMA connector for an external antenna.
Typical transmission ranges are 200m outdoor, 40m indoor.

£155.00

ZHEAD voltage input wireless transmitter

The ZHEAD-HL-G accepts a Voltage input and transmits the value wirelessly to a suitable receiver such as the ZPORT.
The ZHEAD can be mounted in either a metal or plastic IP65 enclosure and is powered by a 3.6V lithium battery. Typical battery life at a 10s update rate would be more than 3 years. Channel number and update rate can be selected using internal DIP switches and you can choose between either an on board ceramic chip antenna or SMA connector for an external antenna.
Typical transmission ranges are 200m outdoor, 40m indoor.

£155.00

ZHEAD RTD input wireless transmitter

The ZHEAD-RTD accepts an RTD input and transmits the value wirelessly to a suitable receiver such as the ZPORT.
The ZHEAD can be mounted in either a metal or plastic IP65 enclosure and is powered by a 3.6V lithium battery. Typical battery life at a 10s update rate would be more than 3 years. Channel number and update rate can be selected using internal DIP switches and you can choose between either an on board ceramic chip antenna or SMA connector for an external antenna.
Typical transmission ranges are 200m outdoor, 40m indoor.

£155.00

Z-HEAD thermocouple or mV input wireless transmitter

The ZHEAD-TC accepts a thermocouple or mV input and transmits the value wirelessly to a suitable receiver such as the Z-PORT.
The ZHEAD can be mounted in either a metal or plastic IP65 enclosure and is powered by a 3.6V lithium battery. Typical battery life at a 10s update rate would be more than 3 years. Channel number and update rate can be selected using internal DIP switches and you can choose between either an on board ceramic chip antenna or SMA connector for an external antenna.
Typical transmission ranges are 200m outdoor, 40m indoor.

£155.00

Z-HEAD DIG input wireless transmitter

The Z-HEAD-DIG accepts an digital input and transmits the value wirelessly to a suitable receiver such as the Z-PORT.
The Z-HEAD can be mounted in either a metal or plastic IP65 enclosure and is powered by a 3.6V lithium battery. Typical battery life at a 10s update rate would be more than 3 years. Channel number and update rate can be selected using internal DIP switches and you can choose between either an on board ceramic chip antenna or SMA connector for an external antenna.
Typical transmission ranges are 200m outdoor, 40m indoor.

£155.00

Z-HEAD Potentiometer input wireless transmitter

The ZHEAD-POT accepts an input from a 2 or 3 wire Potentiometer and transmits the value wirelessly to a suitable receiver such as the Z-PORT.
The ZHEAD can be mounted in either a metal or plastic IP65 enclosure and is powered by a 3.6V lithium battery. Typical battery life at a 10s update rate would be more than 3 years. Channel number and update rate can be selected using internal DIP switches and you can choose between either an on board ceramic chip antenna or SMA connector for an external antenna.
Typical transmission ranges are 200m outdoor, 40m indoor.

£155.00

Z-HEAD Pressure Transducer input wireless transmitter

The ZHEAD-PRESS accepts an input from a pressure transducer load cell and transmits the value wirelessly to a suitable receiver such as the Z-PORT.
The Z-HEAD can be mounted in either a metal or plastic IP65 enclosure and is powered by a 3.6V lithium battery. Typical battery life at a 10s update rate would be more than 3 years. Channel number and update rate can be selected using internal DIP switches and you can choose between either an on board ceramic chip antenna or SMA connector for an external antenna.
Typical transmission ranges are 200m outdoor, 40m indoor.

£155.00

Z-HEAD Current Transformer input wireless transmitter

The Z-HEAD-CT accepts an input from a current transformer with a voltage output and transmits the value wirelessly to a suitable receiver such as the Z-PORT.
The Z-HEAD can be mounted in either a metal or plastic IP65 enclosure and is powered by a 3.6V lithium battery. Typical battery life at a 10s update rate would be more than 3 years. Channel number and update rate can be selected using internal DIP switches and you can choose between either an on board ceramic chip antenna or SMA connector for an external antenna.
Typical transmission ranges are 200m outdoor, 40m indoor.

£155.00

Z-HEAD STRAIN input wireless transmitter

The ZHEAD-STRAIN accepts an input from a Strain Gauge or Load Cell and transmits the value wirelessly to a suitable receiver such as the Z-PORT.
The ZHEAD can be mounted in either a metal or plastic IP65 enclosure and is powered by a 3.6V lithium battery. Typical battery life at a 10s update rate would be more than 3 years. Channel number and update rate can be selected using internal DIP switches and you can choose between either an on board ceramic chip antenna or SMA connector for an external antenna.
Typical transmission ranges are 200m outdoor, 40m indoor.

£155.00

ZTEMP-T-IND Wireless Temperature Transmitter

The ZTEMP-T-IND is a wireless temperature transmitter in an industrial IP65 type housing suitable for wall-mounting in factories and warehouses..
A unit in a more commercial office type enclosure is also available, see the ZTEMP-T-COMM.

£155.00

ZTEMP-T-COMM Wireless Temperature Transmitter

The ZTEMP-T-COMM is a wireless temperature transmitter in a commercial type housing suitable for wall-mounting in offices and domestic houses.
A unit in a more industrial IP65 enclosure is also available, see the ZTEMP-T-IND.

£135.00

ZTEMP-T-RH-IND Temperature & RH Wireless Transmitter

The ZTEMP-IND is a wireless transmitter with a built in Temperature and Relative Humidity sensor.
The channel number and update rate can be set with internal DIP switches and with an update rate of 10s a battery life of over 2 years is achievable.
This unit is housed in an industrial style IP65 housing but a more commercial style encloure is also available, see the ZTEMP-COMM.

£155.00

ZTEMP-T-RH-COMM Temperature & RH Wireless Transmitter

The ZTEMP-RH-COMM is a ZigBee wireless transmitter with a built in Temperature and Relative Humidity sensor.
The channel number and update rate can be set with internal DIP switches and with an update rate of 10s a battery life of over 2 years is achievable.
This unit is housed in a commercial style wall mounting housing but a more industrial IP65 enclosure is also available, see the ZTEMP-RH-IND.

£155.00

ZTEMP-CO2 Wireless Temperature, RH and CO2 Transmitter

The ZTEMP-CO2-COMM is a wireless transmitter with built in CO2, Temperature and Relative Humidity sensors.
The channel number and update rate can be set with internal DIP switches and with an update rate of 10s a battery life of over 2 years is achievable.
This unit is housed in a commercial style wall mounting housing.

£225.00

ZHEAD-TX ZigBee Transmitter with 4-20 mA transmitter supply

The ZHEAD-TX is designed to connect to any 4-20mA transmitter and transmit the process variable across a ZigBee wireless link.
The ZHEAD-TX works by turning on a supply to the 4-20mA transmitter, waiting for the unit to settle and then taking a reading before powering off the mA transmitter and then sending the value to a suitable ZigBee receiver.
The unit is battery powered and for a update rate of 10s the battery will last more than 12 months. The unit is housed in a wall-mounting IP65 enclosure.

£175.00

ZHEAD-4-DIG Multi digital input wireless transmitter

The ZHEAD4-DIG has 4 digital inputs and transmits the values wirelessly to a suitable receiver such as the ZPORT.
The ZHEAD-4 has a wall mounting IP65 enclosure and is powered by a 3.6V lithium battery. Typical battery life at a 10s update rate would be more than 3 years. Channel number and update rate can be selected using internal DIP switches and you can choose between either an on board ceramic chip antenna or SMA connector for an external antenna.
Typical transmission ranges are 200m outdoor, 40m indoors.

£245.00

ZHEAD4-HL Multi input current/voltage input wireless transmitter

The ZHEAD4-HL has 4 mA or voltage inputs and transmits the values wirelessly to a suitable receiver such as the ZPORT.
The ZHEAD4 comes in a wall mounting IP65 enclosure and is powered by a 3.6V lithium battery. Typical battery life at a 10s update rate would be more than 3 years. Channel number and update rate can be selected using internal DIP switches and you can choose between either an on board ceramic chip antenna or SMA connector for an external antenna.
Typical transmission ranges are 200m outdoor, 40m indoor.

£245.00

ZHEAD4-RTD Multi input thermocouple input wireless transmitter

The ZHEAD4-RTD has 4 RTD inputs and transmits the values wirelessly to a suitable receiver such as the ZPORT.
The ZHEAD4 has a wall mounting IP65 enclosure and is powered by a 3.6V lithium battery. Typical battery life at a 10s update rate would be more than 3 years. Channel number and update rate can be selected using internal DIP switches and you can choose between either an on board ceramic chip antenna or SMA connector for an external antenna.
Typical transmission ranges are 200m outdoor, 40m indoors.

£245.00

ZHEAD4-TC Multi input thermocouple input wireless transmitter

The ZHEAD4-TC has 4 thermocouple or mV inputs and transmits the values wirelessly to a suitable receiver such as the ZPORT.
The ZHEAD4 has a wall mounting IP65 enclosure and is powered by a 3.6V lithium battery. Typical battery life at a 10s update rate would be more than 3 years. Channel number and update rate can be selected using internal DIP switches and you can choose between either an on board ceramic chip antenna or SMA connector for an external antenna.
Typical transmission ranges are 200m outdoor, 40m indoors.

£245.00

Cable Replacement System

Cable Replacement System

Z-200 Wireless Cable replacement system

The Z-200 Cable replacement system can be used to transmit almost any number of analogue or digital inputs and outputs to a remote receiver. At the receiver end the parameters can either be read through a digital communications port or re-constructed into mA, voltage or relay outputs. Multiple Z-200-T transmitters can communicate with a single receiver greatly reducing cabling costs.
The number of inputs is expanded using ISOSLICE I/O units and all the parameters can be displayed on the display on the transmitter or receiver.

£218.00

Wireless Receivers

Wireless Receivers

ZPORT Wireless Receiver

The ZPORT wireless receiver collects data from wireless sensors which can then be read by either an RS232/485 or Ethernet network.
The ZPORT also has a local display which allows all the parameters from the wireless sensors such as value, link quality and update time, to be viewed locally.
Housed in a DIN rail enclosure the ZPORT can monitor up to 256 input channels.

£228.00

RAMPORT-ZIG Remote Asset Monitoring modem with ZigBee Wireless Receiver

The RAMPORT-ZIG is a Remote Asset Monitoring modem with built-in ZigBee wireless receiver which can be used to upload data from the wireless network to any standard Web Server.
This then allows the data to be seen from any internet-enabled device through a standard web browser. The RAMPORT is housed in an IP65 wall mounted enclosure.
Different variants of the RAMPORT have inputs from Temperature and RH sensors, analogue and digital inputs or RS232/485 communications links.

£345.00

ZPORT-COMM ZigBee Wireless Receiver

The ZPORT-COMM is a wall mounting wireless receiver which collects data from ZigBee wireless sensors which can then be read by either an RS232/485 or Ethernet network.
The ZPORT-COMM can also have a local display which allows all the parameters from the wireless sensors such as value, link quality and update time, to be viewed locally.
Housed in a wall mounted IP65 enclosure the ZPORT can monitor up to 256 input channels.

£350.00

ZPORT-SLIM Wireless Receiver

The ZPORT-SLIM Wireless Receiver has one analogue and two digital outputs. It is designed to link to any of the Industrial Interface wireless transmitters to provide either an analogue or digital output or the two relays can be used as a wireless Trip Amplifier.

£152.00

Wireless Routers

Wireless Routers

ZROOT-IND Wireless Router

The ZROOT-IND is a wireless router designed to extend the range of wireless sensors.
The unit makes the expansion of wireless networks very straightforward with automatic connection to permitted networks.
Routers can be configured up to seven 'deep' greatly extending the range of the network.

£135.00

ZROOT-COMM Wireless Router

The ZROOT-COMM is a wireless router designed to extend the range of wireless sensors.
The unit makes the expansion of wireless networks very straightforward with automatic connection to permitted networks.
Routers can be configured up to seven 'deep' greatly extending the range of the network.

£135.00

Antennas

Antennas

ANT1000 3dBi Stubby Antenna

The II-ANT1000 is a 3dBi gain stubby antenna with a male SMA connector suitable for ZigBee and other 2.4GHz wireless networks.
It has a maximum power of 2W and its compact size but high gain make it suitable for battery powered sensors and low power routers.

£12.50

ANT2000 5dBi Antenna

The II-ANT2000 is a 5dBi gain stubby antenna with a male SMA connector suitable for ZigBee and other 2.4GHz wireless networks.
It has a maximum power of 3W and its compact size but high gain make it suitable for battery powered sensors and low power routers.

£17.00

ANT3000 4 dBi outdoor antenna

The II-ANT3000 is a 4dBi gain omni antenna with a male N Type connector suitable for ZigBee and other 2.4GHz wireless networks.
It has a maximum power of 20W and is protected to IP67 making it suitable for mounting outdoors.

£38.00

ANT4000 6 dBi Outdoor antenna

The II-ANT4000 is a 6dBi gain omni antenna with a male N Type connector suitable for ZigBee and other 2.4GHz wireless networks.
It has a maximum power of 20W and is protected to IP67 making it suitable for mounting outdoors.

£54.00

ZigBee Cables

A wide range of cables canbe made up with any standard connectors such as SMA or N Type.
Please contact us with your specific requirements and we'll get back to you with a quotation

£0.00