The Process Instrumentation People
  • Industrial Interface Facebook
  • Industrial Interface Twitter
  • Industrial Interface LinkedIn
  • Industrial Interface YouTube

Wireless Building Controls

Industrial Interface manufacture a complete wireless Building Controls System which allows all the usual variables to be monitored without intrusive and costly wiring.

We have wireless sensors for Internal and External temperature, Humidity, Carbon Dioxide (CO2), as well as standard temperature probes such as RTDs and thermocouples. These sensors can link back to receivers with mA or voltage outputs and Ethernet or RS232/485 communications networks. Additional we have wireless receivers with built in GPRS modems which allow logged data to be uploaded to secure web servers, allowing remote monitoring with any standard web browser.

Search Form

Wireless Transmitters

Wireless Transmitters

ZTEMP-T-RH-COMM Temperature & RH Wireless Transmitter

The ZTEMP-COMM is a wireless transmitter with a built in Temperature and Relative Humidity sensor.
The channel number and update rate can be set with internal DIP switches and with an update rate of 10s a battery life of over 2 years is achievable.
This unit is housed in a commercial style wall mounting housing but a more industrial IP65 enclosure is also available, see the ZTEMP-IND.

£155.00

ZTEMP-CO2 Wireless Temperature, RH and CO2 Transmitter

The ZTEMP-CO2-COMM is a wireless transmitter with built in CO2, Temperature and Relative Humidity sensors.
The channel number and update rate can be set with internal DIP switches and with an update rate of 10s a battery life of over 2 years is achievable.
This unit is housed in a commercial style wall mounting housing.

£236.00

Z-HEAD RTD input wireless transmitter

The ZHEAD-RTD accepts an RTD input and transmits the value wirelessly to a suitable receiver such as the ZPORT.
The ZHEAD can be mounted in either a metal or plastic IP65 enclosure and is powered by a 3.6V lithium battery. Typical battery life at a 10s update rate would be more than 3 years. Channel number and update rate can be selected using internal DIP switches and you can choose between either an on board ceramic chip antenna or SMA connector for an external antenna.
Typical transmission ranges are 200m outdoor, 40m indoor.

£120.00

Z-HEAD DIG input wireless transmitter

The Z-HEAD-DIG accepts an digital input and transmits the value wirelessly to a suitable receiver such as the Z-PORT.
The Z-HEAD can be mounted in either a metal or plastic IP65 enclosure and is powered by a 3.6V lithium battery. Typical battery life at a 10s update rate would be more than 3 years. Channel number and update rate can be selected using internal DIP switches and you can choose between either an on board ceramic chip antenna or SMA connector for an external antenna.
Typical transmission ranges are 200m outdoor, 40m indoor.

£120.00

Z-HEAD Pressure Transducer input wireless transmitter

The ZHEAD-PRESS accepts an input from a pressure transducer load cell and transmits the value wirelessly to a suitable receiver such as the Z-PORT.
The ZHEAD can be mounted in either a metal or plastic IP65 enclosure and is powered by a 3.6V lithium battery. Typical battery life at a 10s update rate would be more than 3 years. Channel number and update rate can be selected using internal DIP switches and you can choose between either an on board ceramic chip antenna or SMA connector for an external antenna.
Typical transmission ranges are 200m outdoor, 40m indoor.

£126.00

ZTEMP-T-RH-IND Temperature & RH Wireless Transmitter

The ZTEMP-IND is a wireless transmitter with a built in Temperature and Relative Humidity sensor.
The channel number and update rate can be set with internal DIP switches and with an update rate of 10s a battery life of over 2 years is achievable.
This unit is housed in an industrial style IP65 housing but a more commercial style encloure is also available, see the ZTEMP-COMM.

£135.00

Wireless Receivers

Wireless Receivers

RAMPORT-ZIG Remote Asset Monitoring modem with ZigBee Wireless Receiver

The RAMPORT-ZIG is a Remote Asset Monitoring modem with built-in ZigBee wireless receiver which can be used to upload data from the wireless network to any standard Web Server.
This then allows the data to be seen from any internet-enabled device through a standard web browser. The RAMPORT is housed in an IP65 wall mounted enclosure.
Different variants of the RAMPORT have inputs from Temperature and RH sensors, analogue and digital inputs or RS232/485 communications links.

£345.00

ZPORT-COMM ZigBee Wireless Receiver

The ZPORT-COMM is a wall mounting wireless receiver which collects data from ZigBee wireless sensors which can then be read by either an RS232/485 or Ethernet network.
The ZPORT-COMM can also have a local display which allows all the parameters from the wireless sensors such as value, link quality and update time, to be viewed locally.
Housed in a wall mounted IP65 enclosure the ZPORT-COMM can monitor up to 128 input channels.

£350.00

ZPORT-SLIM Wireless Receiver

The ZPORT-SLIM Wireless Receiver has one analogue and two digital outputs. It is designed to link to any of the Industrial Interface wireless transmitters to provide either an analogue or digital output or the two relays can be used as a wireless Trip Amplifier.

£152.00

Wireless Routers

Wireless Routers

ZROOT-IND Wireless Router

The ZROOT-IND is a wireless router designed to extend the range of wireless sensors.
The unit makes the expansion of wireless networks very straightforward with automatic connection to permitted networks.
Routers can be configured up to seven 'deep' greatly extending the range of the network.

£135.00

ZROOT-COMM Wireless Router

The ZROOT-COMM is a wireless router designed to extend the range of wireless sensors.
The unit makes the expansion of wireless networks very straightforward with automatic connection to permitted networks.
Routers can be configured up to seven 'deep' greatly extending the range of the network.

£135.00