The Process Instrumentation People
  • Industrial Interface Facebook
  • Industrial Interface Twitter
  • Industrial Interface LinkedIn
  • Industrial Interface YouTube

Products

Search Form

Slim Signal Conditioners

Georgin Slim isolating Converters

SG Range of Slim Isolating converters

The SG range is a complete range of 6.2mm wide signal conditioners. The range included dual input and dual output units which minimises the amount of space required for a given number of channels.

£0.00

ATEX Pressure and Temperature Switches

The Georgin range of ATEX certified Pressure transmitters and safety switches includes an instrument for virtually every pressure sensing application.

The pressure transmitters are typically 2-wire 4-20mA output devices whilst the switches typically have one or two sets of changeover contacts.

Our engineers will advise which switch or transmitter most suits your ATEX pressure application.

F Series Pressure & Temperature Switches

Gauge, absolute or differential pressure
Temperature via direct bulb or through capillary
ATEX Approved

£0.00

P Series Pressure & Temperature Switches

Gauge, absolute or differential pressure
Temperature via direct bulb or through capillary
ATEX Approved

£0.00

ATEX Galvanic Isolators

An ATEX approved galvanic isolator limits the energy that can be transmitted to the hazardous area and also isolates the Safe area wiring from that in the Hazardous area.

Using these isolators instruments connected to an Earth potential in the Hazardous area an be connected to measuring equipment in the Safe area with a different Earth potential,

In addition to eliminating Earth Loops as above, these units can convert any signal type from instruments in the Hazardous area to a standard 4-20mA aanalogue output.

Digital output and alarm relay outputs are also available.

BPX Galvanic IS Isolating Converter

The BPX unit is a programmable galvanic isolated converter with a universal input.
It can be configured using PC software using the ProgressX manager software and an RS232 cable

£0.00

ATEX Intrinsically Safe Zener Barriers

Zener barriers are designed to limit the energy that may appear in hazardous areas whatever is connected to the barrier in the safe area.
Typically Zener barriers include a resistive element to limit current, Zener diodes to limit voltage and an in-line fuse to protect the barrier itself.
The Georgin range includes devices to interface to every type of equipment in the hazardous area and our engineers are on-hand to advise the correct barrier for your application and equipment type.

BZG Range of Zener Barriers

BZG Barrier for use with Hazardous Area mounted equipment

£0.00

Communications Gateways

Communications Gateways

E-100 Analogue I/O Communications Gateway

The E-100 Analogue to Communications module provides an easy way of interfacing analogue and digital process parameters to an Ethernet or RS232or RS485 network. The E-100 has one universal analogue input built-in but can be expanded through the use of the Isoslice range of I/O modules.
the built-in display allows easy local monitoring of any of the input parameters.
The default communications Port is an RS485 port other options are shown below.

£218.00

RAMPORT-DIN Remote Asset Monitoring Modem with I/O Expansion Modules

The RAMPORT-DIN is a Remote Asset Monitoring modem with a communications bus which can be used to upload data from ISOSLICE input modules or any device with an RS485 port, to a remote server.
This then allows the data to be seen from any internet-enabled device through a standard web browser. The RAMPORT is housed in a DIN rail mounting enclosure.
Different variants of the RAMPORT have inputs from wireless sensors, Temperature and RH sensors and RS232 or RS485 communications ports.

£345.00

WiFi Modules

WiFi Modules

FLYPORT USB Nest Starter Kit

The FLYPORT USB Starter Kit allows you to connect the Flyport WiFi modules to any PC in just a couple of minutes.
The USB port is used to power the module and also downloads the application firmware using the embedded Brutus bootloader.
Screw terminals allow easy connection to the FLYPORTs hardware features including digital & analogue I/O and various communications channels.

£61.20

FLYPORT WiFi Module

The FLYPORT-PCB is a WiFi module with a built in Microchip PIC24F processor and 256K Flash and 16K RAM.
The Flyport also has a range of I/O, including 10 digital I/O, 4 analogue inputs, 1 UART, 1 SPI and 1 I2C bus. The -PCB has a ceramic chip antenna, the -UFL has a uFL SMT connector for an external antenna.

£41.65

FLYPORT WiFi Module

The FLYPORT-PCB is a WiFi module with a built in Microchip PIC24F processor and 256K Flash and 16K RAM.
The Flyport also has a range of I/O, including 10 digital I/O, 4 analogue inputs, 1 UART, 1 SPI and 1 I2C bus. The -PCB has a ceramic chip antenna, the -UFL has a uFL SMT connector for an external antenna.

£41.65

Wireless Modules

Wireless Modules

Jennic JN5139 ZigBee Module with SMA connector JN5139-Z01-M01R1V

The JN5139 is a low power wireless microcontroller suitable for IEEE802.15.4 and ZigBee applications.
The device integrates a 32-bit RISC processor with a fully compliant 2.4GHz IEEE802.15.4 transceiver, 192kB of ROM, a selection of RAM sizes and a mixture of analogue and digital peripherals. Power saving and timed sleep modes make this highly efficient unit particularly suited for battery-powered applications.
This unit comes with an SMA connector for connecting an external antenna.

£0.00

Jennic JN5139 ZigBee Module with ceramic antenna JN5139-Z01-M00R1T

The JN5139 is a low power wireless microcontroller suitable for IEEE802.15.4 and ZigBee applications.
The device integrates a 32-bit RISC processor with a fully compliant 2.4GHz IEEE802.15.4 transceiver, 192kB of ROM, a selection of RAM sizes and a mixture of analogue and digital peripherals. Power saving and timed sleep modes make this highly efficient unit particularly suited for battery-powered applications.
This unit comes with a built-in ceramic pcb antenna.

£0.00

Jennic JN5139 High Power ZigBee Module with Ufl connector JN5139-Z01-M04R1V

The JN5139 is a low power wireless microcontroller suitable for IEEE802.15.4 and ZigBee applications.
The device integrates a 32-bit RISC processor with a fully compliant 2.4GHz IEEE802.15.4 transceiver, 192kB of ROM, a selection of RAM sizes and a mixture of analogue and digital peripherals. Power saving and timed sleep modes make this highly efficient unit particularly suited for battery-powered applications.
This high power unit comes with an Ufl connector for connecting an external antenna.

£0.00

Jennic JN5139 High Power ZigBee Module with SMA connector JN5139-Z01-M02R1V

The JN5139 is a low power wireless microcontroller suitable for IEEE802.15.4 and ZigBee applications.
The device integrates a 32-bit RISC processor with a fully compliant 2.4GHz IEEE802.15.4 transceiver, 192kB of ROM, a selection of RAM sizes and a mixture of analogue and digital peripherals. Power saving and timed sleep modes make this highly efficient unit particularly suited for battery-powered applications.
This high power unit comes with an SMA connector for connecting an external antenna.

£0.00

Jennic JN5139 ZigBee Module with Ufl connector JN5139-Z01-M03R1V

The JN5139 is a low power wireless microcontroller suitable for IEEE802.15.4 and ZigBee applications.
The device integrates a 32-bit RISC processor with a fully compliant 2.4GHz IEEE802.15.4 transceiver, 192kB of ROM, a selection of RAM sizes and a mixture of analogue and digital peripherals. Power saving and timed sleep modes make this highly efficient unit particularly suited for battery-powered applications.
This unit comes with a Ufl connector for connecting an external antenna.

£0.00

Radio Modem I/O Expansion Units

Radio Modem I/O Expansion Units

ARM-X4404/I I/O Expansion Unit

ARM-X units are expansion units which can be used with the ARM-SE and ARM-D series modems to increase the number of I/O transmitted by the wireless link.
A number of different I/O variants are available and up to four expansion units can be used with each modem.

£416.00

ARM-X4404/U I/O Expansion Unit

ARM-X units are expansion units which can be used with the ARM-SE and ARM-D series modems to increase the number of I/O transmitted by the wireless link.
A number of different I/O variants are available and up to four expansion units can be used with each modem.

£416.00

ARM-X4440/I I/O Expansion Unit

ARM-X units are expansion units which can be used with the ARM-SE and ARM-D series modems to increase the number of I/O transmitted by the wireless link.
A number of different I/O variants are available and up to four expansion units can be used with each modem.

£416.00

ARM-X4440/U I/O Expansion Unit

ARM-X units are expansion units which can be used with the ARM-SE and ARM-D series modems to increase the number of I/O transmitted by the wireless link.
A number of different I/O variants are available and up to four expansion units can be used with each modem.

£416.00

ARM-X8800 I/O Expansion Unit

ARM-X units are expansion units which can be used with the ARM-SE and ARM-D series modems to increase the number of I/O transmitted by the wireless link.
A number of different I/O variants are available and up to four expansion units can be used with each modem.

£307.00