Wireless Sensors & Systems
We manufacture a wide range of wireless sensors and network co-ordinators. These allow any process variable to be transmitted wirelessly to receiver units where the value can be either output as a mA or voltage signal or stored as a Modbus register for transmission to an Ethernet, RS232 or RS485 communications network. An IoT-Gateway is available to send the data collected to Cloud-Servers including the iot.industrialinterface.co.uk IoT platform
Transmitters include units for pressure, mA, voltage, RTD and thermocouple inputs and the IWTxT unit can be used with any standard 4-20mA to give it wireless capability.
20 results found:
Matching categories: Wireless Sensors & Systems / Wireless Transmitters / Wireless Receivers
£285.00
Our Industrial IoT Starter kits are designed to give our customers a quick and easy pathway to a fully featured operational IoT System.
Kits comprise of the following parts:
IoT Gateway with wireless receiver & Cellular modem
Any 2 IWPT Wireless pressure transmitters
Access to IoT software platform
'Out the Box' quick start guide
£442.34
The IoT-Gateway is a wall mounting wireless receiver which collects data from IWT wireless sensors which can then be sent to any cloud-based server
The IoT Gateway can also have a local display which allows all the parameters from the wireless sensors such as value, link quality and update time, to be viewed locally.
Housed in a wall mounted IP65 enclosure the IoT Gateway can monitor up to 128 IWT wireless transmitters along with 4 off analogue inputs, 8 off digigal inputs and Modbus registers from external equipment using its built-in RS485 Communications Port.
IWPT Industrial Wireless Pressure transmitter
£235.16
The IWPT Wireless Pressure Transducer is a cost effective replacement
to a traditionally wired pressure transducer that offers the advantages
of a low-cost installation in inaccessible and expensive installation
environments.
It is easily paired to any of the range of IWR receivers - thus offering
a “plug and play” solution to your pressure measurement applications.
Each device is temperature compensated, calibrated and supplied with
a traceable serial number.
£285.00
Our Industrial IoT Starter kits are designed to give our customers a quick and easy pathway to a fully featured operational IoT System.
Kits comprise of the following parts:
IoT Gateway with wireless receiver & Cellular modem
Any 2 IWTT Wireless temperature transmitters
Access to IoT software platform
'Out the Box' quick start guide
£331.51
The IWR-PORT wireless Gateway provides a link between IWT wireless
sensors and sensor networks and Industrial Ethernet or RS-232/485
networks.
This allows our range of IWT wireless transmitters to be incorporated into
new or existing Industrial Ethernet or RS-232/485 data monitoring and
control networks.
The IWR-PORT can interface with standard 10/100 Base-T Ethernet
networks giving access to the standard MODBUS TCP protocol, ensuring
compatibility with most industrial automation systems.
MODBUS RTU is available when an RS-232/485 network is used.
IWTT wireless RTD thermocouple or mV input transmitter BSP 1/4"
£182.10
The IWTT Wireless Temperature Transducer is a cost effective
replacement to a traditionally wired temperature transducer that offers
the advantages of a low-cost installation in inaccessible and expensive
installation environments.
It is easily paired to any of the range of IWR receivers - thus offering
a “plug and play” solution to your pressure measurement applications.
The instrument uses either J or K type thermocouples or 3-wire RTD
sensors fitted to an acetal housing giving excellent media compatibility
for the harshest of applications. Compression fittings are available
which allow the head to be orientated in the required direction.
The IWTT sensor can be used with any of the IWR range of receivers.
A line-of-sight range of up to 500 m is possible depending on the
wireless receiver used (refer to specific receiver data sheets for further
information).
Each device is temperature compensated, calibrated and supplied with
a traceable serial number.
IWTTU RTD or thermocouple input wireless transmitter NPT 1/4"
£182.10
The IWTTU Wireless Temperature Transducer is a cost effective
replacement to a traditionally wired temperature transducer that offers
the advantages of a low-cost installation in inaccessible and expensive
installation environments.
It is easily paired to any of the range of IWR receivers - thus offering
a “plug and play” solution to your pressure measurement applications.
The instrument uses either J or K type thermocouples or 3-wire RTD
sensors fitted to an acetal housing giving excellent media compatibility
for the harshest of applications. Compression fittings are available
which allow the head to be orientated in the required direction.
The IWPT sensor can be used with any of the IWR range of receivers.
A line-of-sight range of up to 500 m is possible depending on the
wireless receiver used (refer to specific receiver datasheets for further
information).
Each device is temperature compensated, calibrated and supplied with
a traceable serial number.
£285.00
Our Industrial IoT Starter kits are designed to give our customers a quick and easy pathway to a fully featured operational IoT System.
Kits comprise of the following parts:
IoT Gateway with wireless receiver & Cellular modem
Any 2 IWT Wireless Transmitters
Access to IoT software platform
'Out the Box' quick start guide
£331.51
Features
• 2.4GHz Wireless to USB Gateway
• Enables easy monitoring of our wireless networks using any PC
• Free of charge monitoring software allows all wireless parameters to
be viewed and logged
• Logs data to .csv file
The IWR-USB Gateway provides a link between wireless sensors and
any PC with a USB connection.
A free of charge software package allows monitoring and logging of all
the IWT wireless sensors in the network via a standard PC.
The IWR-USB saves the time-stamped data collected in a standard .csv
file for easy handling by packages such as Microsoft® Excel®.
IWTxT Wireless Transmitter with 4-20mA transmitter supply
£215.24
The IWTxT is designed to convert any standard 4-20 mA transmitter into
a wireless unit.
It works by switching on a supply to the 4-20 mA transmitter, waiting for
a suitable settling time and then sending the data to one of Sensata’s
standard wireless receiver units.
The IWTxT is specially designed to maximise battery life and in a typical
application the battery life will exceed 12 months. The data update rate
is user selectable to suit the requirement of each measured variable and
so maximize battery life.
Typical update rates include 1 second, 10 seconds, 60 seconds or 1 hour.
The system also features a signal strength reading and time since last
transmission which can be remotely monitored.
The IWTxT is designed to operate with the IWR range of receivers.
The IWR-1 can output a 4-20 mA or 1-5V signal whilst the IWR-PORT
can store up to 128 variables for transmission to an industrial Ethernet
connection or an RS-232/485 communications link.
IWR-1 Single Channel Wireless Receiver
£184.14
The IWR-1 is a single channel receiver designed to pair with any of our range of IWT wireless transmitters to form a cost effective alternative to traditional wired systems.
This offers a low cost solution to inaccessible or expensive installation environment.
The receiver has a user selectable voltage or mA output corresponding
to the calibrated range of the remote Wireless Transducer and 5A rated
changeover contacts for alarm functionality.
User configuration is possible, however the single channel transmitter/
receiver combination is designed to work ‘out of the box’ offering a
simple plug and play solution to remote measurement applications.
With the standard 0dBI antenna, a line-of-sight range of up to 500 m
can be achieved and, using the optional 3dBI antenna, up to 750m (LOS)
is achievable.
IWDigT digital input wireless transmitter
£152.99
The IWDigT Wireless Transmitter is a cost effective alternative to
traditional wiring that offers the advantages of a low-cost installation in
inaccessible and expensive installation environments.
It is easily paired to any of the range of IWR receivers - thus offering
a “plug and play” solution to your digital switched or pulse counter
application.
The IWDigT sensor should be used with any of the IWR range of
receivers. A line-of-sight range of up to 500 m is possible depending
on the wireless receiver used (refer to specific receiver datasheets for
further information).
IWmAT mA input wireless transmitter
£152.99
The IWmAT Wireless Transmitter is a cost effective alternative to
traditional wiring that offers the advantages of a low-cost installation in
inaccessible and expensive installation environments.
It is easily paired to any of the range of IWR receivers - thus offering a
“plug and play” solution to your 4-20 mA current application.
The IWmAT sensor should be used with any of the IWR range of
receivers. A line-of-sight range of up to 500 m is possible depending
on the wireless receiver used (refer to specific receiver datasheets for
further information).
IWR-5 Five channel Wireless Receiver
£256.85
The IWR-5 is a five channel receiver designed to pair with the IWPT
& IWTT wireless pressure & temperature transducers to form a cost
effective replacement of the traditional wired transducers. This offers a
low cost solution to inaccessible or expensive installation environments.
The receiver has user selectable voltage or mA outputs corresponding to
the calibrated range of the remote Wireless Transducers and 5A rated
changeover contacts for alarm functionality.
User channel configuration is possible with the use of the program,
IWR-Set, which ensures minimal user set-up time and thus ensures a
simple solution to multi-channel pressure & temperature measurement
applications. With the standard 0dBI antenna, a line-of-sight range of
up to 500 m can be achieved and, using the optional 3dBI antenna, up to
750m (LOS) is achievable.
IWCTT Current Transformer input wireless transmitter
£152.99
The IWCTT Wireless Transmitter is a cost effective alternative to traditional wiring that offers the advantages of a low-cost installation in inaccessible and expensive installation environments. Operates with any Split Core current transformer which gives a mV AC output, typically 333mV.
It is easily paired to any of the range of IWR receivers - thus offering a “plug and play” solution to your current measuring application. The IWCTT sensor should be used with any of the IWR range of receivers. A line-of-sight range of up to 500 m is possible depending on the wireless receiver used (refer to specific receiver datasheets for
further information).
IWLoadT Strain Gauge and Load Cell input wireless transmitter
£152.99
The IWLoadT accepts an input from a Strain Gauge or Load Cell and transmits the value wirelessly to a suitable receiver such as the IWR-PORT.
The IWLoadT is mounted in an acetal plastic IP67 enclosure and is powered by a 3.6V lithium battery. Typical battery life at a 10s update rate would be more than 3 years. Channel number and update rate can be selected using internal DIP switches and you can choose between either an on board ceramic chip antenna or SMA connector for an external antenna.
Typical transmission ranges are 500m outdoor, 50m indoor.
IWPotT Potentiometer input wireless transmitter
£152.99
The IWPotT accepts an input from a 2 or 3 wire Potentiometer and transmits the value wirelessly to a suitable receiver such as the IWR-PORT.
The IWPotT is housed in an acetal IP67 enclosure and is powered by a 3.6V lithium battery. Typical battery life at a 10s update rate would be more than 5 years. Channel number and update rate can be selected using internal DIP switches and you can choose between either an on board ceramic chip antenna or SMA connector for an external antenna.
Typical transmission ranges are 500m outdoor, 50m indoor.
IWTaT Wireless Ambient Temperature Transmitter
£145.00
The IWTaT ambient temperature transmitter has been designed to
operate with the range of wireless receivers manufactured by Cynergy3.
Either ambient temperature alone or both temperature and humidity
measurements can be specified. Typically the unit transmits the
measured values back to a IWR-PORT which can be connected to an
Ethernet or RS-232/485 communications network. For temperature and
humidity see the IWTRhT.
The unit is specially designed to maximise battery life and in a typical
application the battery life can exceed five years.
IWTRhT Temperature & RH Wireless Transmitter
£175.50
The IWTRhT ambient temperature and relative humidity transmitter has
been designed to operate with the range of wireless receivers designed
and manufactured by Sensata.
Either ambient temperature alone or both temperature and humidity
measurements can be specified. (see IWTaT)
Typically the unit transmits the measured values back to a IWR-PORT
which can be connected to an Ethernet or RS-232/485 communications
network.
The unit is specially designed to maximize battery life and in a typical
application the battery life can exceed three years.
IWVT voltage input wireless transmitter
£152.99
The IWVT Wireless Transmitter is a cost effective alternative to
traditional wiring that offers the advantages of a low-cost installation in
inaccessible and expensive installation environments.
It is easily paired to any of the range of IWR receivers - thus offering a
“plug and play” solution to your analog voltage application.
The IWVT sensor should be used with any of the IWR range of receivers.
A line-of-sight range of up to 500 m is possible depending on the
wireless receiver used (refer to specific receiver datasheets for further
information).