Search Results
85 results found:
You searched for:
ISOSLICE-9 4 Channel AC Current & Voltage input module
£285.30
The ISOSLICE-9 is an isolated input module which has four AC current or voltage input channels.
The unit has channel-to channel and input to power supply isolation and connects automatically to the E-100, IWR-Port or IoT-Gateway units allowing a complete I/O system to be achieved.
IWTRhT Temperature & RH Wireless Transmitter
£175.50
The IWTRhT ambient temperature and relative humidity transmitter sends the measured values to any of the IWR range of wireless receivers. Up to 128 IWTRhT transmitters can be sent to a single receiver.
£184.51
The Isocon-3 isolating signal converter can accept virtually any input including 4-20 mA, voltage, thermocouples, PT100 sensors and potentiometers and provide an isolated 4-20mA or Voltage output..
The Isocon-6 is also available if a DC power supply is required.
IWVT voltage input wireless transmitter
£152.99
The IWVT Wireless Transmitter takes in any existing DC Voltage signal and transmits the value to any of the IWR range of wireless receivers.
Dualcon-3 Dual Output Isolating signal Converter
£275.31
The Dualcon-3 signal isolator accepts virtually any input including 4-20mA loops, voltage inputs, thermocouples, PT100 sensors and potentiometers and provides two isolated 4-20mA or Voltage outputs.
the Dualcon-3 is powered from 90-264 Vac whilst the Dualcon-6 is also available if a DC power supply is required.
£184.51
The TC-TC is a Thermocouple Isolator which is used to isolate any thermocouple and provide an identical simulated mV thermocouple output.
Typically used to isolate thermocouples from input cards stopping any earth loop effects and eliminating any noise problems.
TC-TC-DUAL Thermocouple Isolator with 2 outputs
£275.31
The DCON-TCTC is a Thermocouple Isolator which is used to isolate any thermocouple and provide an identical simulated thermocouple output together with a second output which can also be a thermocouple output or a mA or Voltage output proportional to temperature.
The unit is typically used to isolate thermocouples from input cards stopping any earth loop effects and eliminating any noise problems.
Isocon-LIN Linearising Signal Converter
£184.51
The Isocon-LIN is a universal input DC powered signal converter which can linearise the output using up to 31 points of linearisation. The Isocon-LIN accepts virtually any input including 4-20mA loops, voltage inputs, thermocouples, PT100 sensors and potentiometers and provides an isolated linearised mA or Voltage output.
The Isocon-6 has a 12-36Vdc power supply and the Isocon-3 is also available if a AC power supply is required.
Isocon-AVE Averaging Signal Converter
£184.51
The Isocon-AVE is a universal input signal converter which can average the output over any time period from 1s to 60 seconds. The Isocon-AVE accepts virtually any input including 4-20mA loops, voltage inputs, thermocouples, PT100 sensors and potentiometers and provides an isolated averaged mA or Voltage output.
The Isocon-AVE-6 has a 12-36Vdc power supply and the Isocon-AVE-3 is also available if a AC power supply is required.
Isocon-DRIVE Isolating Signal Converterwith high current output
£184.51
The Isocon-DRIVE is a universal input DC powered signal converter which can output a high current output up to 125mA. The Isocon-DRIVE accepts virtually any input including 4-20mA loops, voltage inputs, thermocouples, PT100 sensors and potentiometers and provides a high current output or up to 0-125mA which can be used to drive outputs such as ballast controllers or control valves.
The Isocon-6 has a 12-36Vdc power supply and the Isocon-3 is also available if a AC power supply is required.
STRAIN Universal Strain Gauge Transmitter
£184.51
The STRAIN universal strain gauge transmitter can connect with almost any strain gauge, loadcell or pressure transducer and provides an isolated 4-20mA or voltage output. Virtually any 4-wire strain gauge or load cell can be connected with the unit supplying a 10Vdc excitation voltage.
Two versions are available, the STRAIN-6 with a 12-36Vdc supply or the STRAIN-3 with a 90-264 Vac supply
STRAIN-DUAL Universal Strain Gauge Transmitter with two outputs
£275.31
The STRAIN-Dual universal strain gauge transmitter can connect with almost any strain gauge, loadcell or pressure transducer and provides two isolated 4-20mA or voltage outputs. Virtually any 4-wire strain gauge or load cell can be connected with the unit supplying a 10Vdc excitation voltage.
Two versions are available, the STRAIN-DUAL-6 with a 16-36Vdc supply or the STRAIN-DUAL-3 with a 90-264 Vac supply
£117.04
The 420TWHL loop powered isolator can replace standard DIN rail terminals to provide input isolation, signal conversion and RFI and noise rejection.
The isolators are a 2-wire device needing a 24Vdc supply on one terminal and returning a 4-20mA on the other.The input for the HL version can be configured for 4-20mA. 0-10V or similar, see the data sheet for all the variations available.
Dualcon-AVE Dual Output converter with output averaging
£275.31
The Dualcon-AVE accepts virtually any input including 4-20mA loops, voltage inputs, thermocouples, PT100 sensors and potentiometers and provide two isolated 4-20mA or Voltage outputs which can be averaged over a time period from 1s to 60s.
The Dualcon-AVE-6 has a 16Vdc to 36Vdc supply and the Dualcon-AVE-3 is also available if a AC power supply is required.
FREQCON-IPWM Analogue to PWM Frequency Converter
£212.43
The FREQCON-IPWM converter accepts any type of process input and provides a PWM output.
This is typically used with units such as PLC's which don't have an analogue input but do have a PWM input.
Using the FREQCON-IPWM mA, thermocouple, RTD, or voltage signal can be converted to a PWM output which can then be fed into a PLC or similar device.
FREQCON-PWMI PWM Frequency to Analogue Converter
£212.43
The FREQCON-PWMI converter can convert virtually any PWM type input into an isolated 4-20mA or Voltage output. Any frequency between 0 and 250kHZ can be converted and almost any input voltage level can be read.
£54.00
The II-ANT4000 is a 6dBi gain omni antenna with a male N Type connector suitable for ZigBee and other 2.4GHz wireless networks.
It has a maximum power of 20W and is protected to IP67 making it suitable for mounting outdoors.
VOLTCON High Voltage Isolating Converter
£265.00
This range of isolated signal converters can accept a wide range of AC and DC voltages and provide an isolated
4-20mA output. Voltages up to 500V AC or DC can be converted.
The device uses a true RMS input stage which allows accurate measurement of non-perfect AC waveforms.
420TWRTD Loop Powered isolator
£117.04
The 420TWRTD can replace standard DIN rail terminals to provide input isolation, signal conversion and RFI and noise rejection.
The isolators are 2-wire devices needing a 24Vdc supply on one terminal and returning a 4-20mA output on the other.The input for the RTD version can be configured for most 2 or 3 wire PT100 sensors please see the data sheet for all the options available.
£0.00
A wide range of cables canbe made up with any standard connectors such as SMA or N Type.
Please contact us with your specific requirements and we'll get back to you with a quotation
420-DIG Digital Input & Output Isolator
£49.00
The 420-DIG digital isolator is typically used to provide field to input isolation for all types of digital input or output.
The 420-DIG units allow PLC and other I/O cards to connect to high voltage digital inputs and to switch higher output loads.