DIN rail Power Supplies
Our range of DIN rail mounted Power Supplies are available in Power Outputs from 10W to 480W and output voltages including 5V, 12V and 24Vdc. All our power supplies have a wide ranging AC input. Also in this section are some DIN rail mounted DC-DC converters. These are ideal for providing an isolated, 'clean' DC supply for instrumentation loops. Wide ranging voltage inputs are available from 18 to 72 Vdc and outputs include 5V,12V and 24Vdc.
91 results found:
FREQCON-PWMI PWM Frequency to Analogue Converter
£212.43
The FREQCON-PWMI converter can convert virtually any PWM type input into an isolated 4-20mA or Voltage output. Any frequency between 0 and 250kHZ can be converted and almost any input voltage level can be read.
£54.00
The II-ANT4000 is a 6dBi gain omni antenna with a male N Type connector suitable for ZigBee and other 2.4GHz wireless networks.
It has a maximum power of 20W and is protected to IP67 making it suitable for mounting outdoors.
VOLTCON High Voltage Isolating Converter
£265.00
This range of isolated signal converters can accept a wide range of AC and DC voltages and provide an isolated
4-20mA output. Voltages up to 500V AC or DC can be converted.
The device uses a true RMS input stage which allows accurate measurement of non-perfect AC waveforms.
420TWRTD Loop Powered isolator
£117.04
The 420TWRTD can replace standard DIN rail terminals to provide input isolation, signal conversion and RFI and noise rejection.
The isolators are 2-wire devices needing a 24Vdc supply on one terminal and returning a 4-20mA output on the other.The input for the RTD version can be configured for most 2 or 3 wire PT100 sensors please see the data sheet for all the options available.
£0.00
A wide range of cables canbe made up with any standard connectors such as SMA or N Type.
Please contact us with your specific requirements and we'll get back to you with a quotation
420-DIG Digital Input & Output Isolator
£49.00
The 420-DIG digital isolator is typically used to provide field to input isolation for all types of digital input or output.
The 420-DIG units allow PLC and other I/O cards to connect to high voltage digital inputs and to switch higher output loads.
£117.04
The 420TWTC can replace standard DIN rail terminals to provide input isolation, signal conversion and RFI and noise rejection.
The isolators are 2-wire devices needing a 24Vdc supply on one terminal and returning a 4-20mA output on the other.The input for the TC version can be configured for most standard thermocouples types and mV inputs, see the data sheet for all the options available.