DIN rail Power Supplies
Our range of DIN rail mounted Power Supplies are available in Power Outputs from 10W to 480W and output voltages including 5V, 12V and 24Vdc. All our power supplies have a wide ranging AC input. Also in this section are some DIN rail mounted DC-DC converters. These are ideal for providing an isolated, 'clean' DC supply for instrumentation loops. Wide ranging voltage inputs are available from 18 to 72 Vdc and outputs include 5V,12V and 24Vdc.
91 results found:
20-ALM Loop Powered Trip Amplifier
£100.77
The 20-ALM is a unique loop-powered trip amplifier which can be wired into any 4-20mA loop and provide a single N.O or N.C alarm relay output.
The setpoint is set using a front panel potentiometer and can be checked by measuring a 0-1V signal on the setpoint terminals.
£52.00
The DPP50-24 is a 50W Power supply with a universal input and 24Vdc output.
The unit is housed in a compact DIN rail enclosure. The input voltage range is 90 to 264 Vac and other power options are available.
FREQCON Frequency to Analogue Converter
£212.43
The FREQCON-6 converter can convert virtually any frequency type input into an isolated 4-20mA or Voltage output. Any frequency between 0 and 250kHZ can be converted and almost any input voltage level can be read.
ISOSLICE-4 Four Channel thermocouple input module
£308.57
The ISOSLICE-4 is an isolated input module which has four thermocouple input channels.
The unit has channel-to channel and input to power supply isolation and connects automatically to the E-100, IWR-Port or IoT-Gateway units allowing a complete I/O system to be achieved.
IWDigT digital input wireless transmitter
£152.99
The IWDigT Wireless Transmitter takes an On/Off or pulse meter input and sends the value to any of the
IWR range of wireless receivers. Typical inputs are volt-free contacts from switches, relays or utility meters.
IWmAT mA input wireless transmitter
£152.99
The IWmAT Wireless Transmitter takes in any existing 4-20mA signal and transmits the value to any of the IWR range of wireless receivers. The IWmAT works with existing powered 4-20mA loops. If power is required then the IWTxT can be used as this provides an excitation voltage to any 4-20mA transmitter.
.
IWR-5 Five channel Wireless Receiver
£256.85
The IWR-5 is a five channel receiver designed to pair with any of our range of IWT wireless transmitters. It outputs up to five 4-20mA or 1-5Vdc signals and also has a relay output which can be used as a high/low or loss of signal alarm. See the IWR-1 for a single channel version which has a single 4-20mA or 1-5Vdc output.
Newhaven NHD-C12864WC-FSW-FBW-3V3-M
£9.75
The NEWHAVEN DISPLAY INTERNATIONAL Liquid crystal display module designed for seamless integration into a variety of applications. Boasting a robust ST7565R controller, this module supports both parallel and serial interfaces, ensuring versatility for developers. Its transreflective technology, combined with a side white LED backlight, provides excellent visibility in various lighting conditions, making it an ideal choice for both indoor and outdoor environments.
Includes backlighting for improved visibility in low light situations
Has a wide operational temperature range catering to diverse environmental conditions
Mounting holes simplify the installation process
4002ALMHL-FC Dual Trip Amplifier
£265.00
The 4002LMHL is an analogue Trip Amplifier designed to take mA or Voltage inputs and provide two alarm relay outputs and an optional isolated re-transmission of he input signal.
It has an optional LED display which can be used to display the input and setpoints as a 0-100% value.
A 115/230 Vac version is available as well as a 24Vdc powered unit.
£74.00
The DPP100-24 is a 100W Power supply with a universal input and 24Vdc output.
The unit is housed in a compact DIN rail enclosure. The input voltage range is 90 to 264 Vac and other power options are available.
ISOSLICE-5 Eight Digital input module
£209.34
The ISOSLICE-5 is an isolated input module which has four thermocouple input channels.
The unit has channel-to channel and input to power supply isolation and connects automatically to the E-100, IWR-Port or IoT-Gateway units allowing a complete I/O system to be achieved.
IWCTT Current Transformer input wireless transmitter
£152.99
The IWCTT Wireless Transmitter operates with any current transformer which gives a mV AC output, typically 333mV.
It is easily paired to any of the range of IWR receivers - offering a “plug and play” solution to your AC current measuring application.
MATHSCON-6 Programmable Maths Unit
£247.46
The MATHSCON-6 performs a maths function on two inputs and provides an isolated 4-20mA or voltage output of the result. One of the inputs is universal the other is mA or voltage only.
Maths Functions include Average, Add, Subtract, Division, Multiply and Square Root. Custom functionality can also be supplied.
£11.55
The ML865G1 is the Category (Cat) M1/NB2 evolution in the widely deployed Telit Cinterion xL865 product family. Specified in the Release (Rel) 14 of the 3GPP standard, LTE Cat M1/NB2 is specially tailored for IoT applications, offering optimized power consumption and enhanced coverage.
4002ALMRTD-FC Dual Trip Amplifier
£295.00
The 4002ALMRTD is an analogue Trip Amplifier designed to take RTD inputs and provide two alarm relay outputs and an optional isolated re-transmission of he input signal.
It has an optional LED display which can be used to display the input and setpoints as a 0-100% value.
A 115/230 Vac version is available as well as a 24Vdc powered unit.
420TWAC Current Transformer Transmitter
£117.04
The 420TWAC is a loop powered transmitter which accepts AC current or voltage inputs and supplies a 4-20mA output. The unit measures the true RMS value of the input making the unit suitable for all AC waveforms including those from inverters and variable speed drives.
£93.00
The DPP240-24 is a 240W Power supply with a universal input and 24Vdc output.
The unit is housed in a compact DIN rail enclosure. The input voltage range is 90 to 264 Vac and other power options are available.
ISOSLICE-6 Four Digital output module
£240.34
The ISOSLICE-6 is an isolated output module which has four relay output channels.
The unit has channel-to channel and input to power supply isolation and connects automatically to the E-100, IWR-Port or IoT-Gateway units allowing a complete I/O system to be achieved.
IWLoadT Strain Gauge and Load Cell input wireless transmitter
£152.99
The IWLoadT accepts an input from a Strain Gauge or Load Cell and transmits the value wirelessly to any of the IWR range of wireless receivers. Typical inputs are mV/V inputs from 4-wire load cells and strain gauges.
4002ALMTC-FC Dual Trip Amplifier
£295.00
The 4002LMTC is an analogue Trip Amplifier designed to take thermocouple or voltage inputs and provide two alarm relay outputs and an optional isolated re-transmission of he input signal.
It has an optional LED display which can be used to display the input and setpoints as a 0-100% value.
A 115/230 Vac version is available as well as a 24Vdc powered unit.
420i 4-20mA Loop Powered Isolator
£117.04
The 420i 4-20mA loop powered isolator is used to provide an isolated 4-20mA current loop from any existing 4-20mA loop. The isolator gets its power from the input loop and so needs no auxiliary power supply.